EB-146

Retractable, Standard Service Injection Quill
1"  Valve x 1/2" Solution Tube with Integrated Spring Loaded Check Valve

DOWNLOADS

SPECIFICATIONS

SAFETY RATING 150 psi
CHECK VALVE Integrated spring loaded check valve
SAF-T-SEAL TIP Optional
QUICK DISCONNECT Not available
VALVE/PROCESS CONNECTION SIZE 1"
INLET CONNECTION SIZE 1/2"
SOLUTION TUBE SIZE 1/2"
SOLUTION TUBE ID - PVC, CPVC & ALLOY WITH SAF-T-SEAL 0.546"
SOLUTION TUBE ID - ALLOY W/O SAF-T-SEAL 0.622"
SOLUTION TUBE OD - ALL MATERIALS 0.840"
EB-146 series retractable injection quill with integrated check valve in brass valve variant.
EB-146 series retractable injection quill with integrated check valve in stainless steel valve variant.

ORDERING OPTIONS

Example:  EB-146-S-S-6-0-E

SERIES

EB-146

VALVE MATERIAL

B = Brass
S = Stainless Steel

TUBE MATERIAL

P = PVC
C = CPVC
H = Alloy C276
S = 316SS
A = Alloy20
T = Titanium Gr.2

INSERTION LENGTH

2 = 2"
4 = 4"
6 = 6"
Alloy Models Only
8 = 8"
10 = 10"
12 = 12"
18 = 18"
24 = 24"

TIP CONFIGURATION

0 = Standard
B = 45° Bevel
CE= SAF-T-Seal Tip, EPDM
CV = SAF-T-Seal Tip, FKM

 

Note: Availability of SAF-T-Seal tip with selection of titanium solution tube material is subject to change. Please consult factory prior to selecting.

SEAL TYPE

V = FKM
E = EPDM
K = KALREZ 6375

DIMENSIONS

(A) OPERATING LENGTH 13.75" - BRASS
15" STAINLESS STEEL
(B) VALVE/GLAND LENGTH 7" - BRASS
8.25" - STAINLESS STEEL
EXTRACTION LENGTH (A) + (B) + INSERTION LENGTH
dimensions-eb-146-b

Brass valve shown.  Stainless steel ball valve also available.

FLEXIBLE HOSE ASSEMBLIES

Available separately, flexible hose assemblies help take the guess work out of connecting to a chemical feed when installing.  Additionally, by avoiding multiple rigid fittings, the assemblies can improve the ease of use when inserting and retracting the solution tube.

Flexible Hose Assembly Image
View Hose Assemblies

TECHNICAL NOTES

  1. Check valve spring cracking pressure is 5 psi.
  2. Main connection thread type is NPT by default. CC (AWWA) also available.  Consult factory for details.
  3. Maximum insertion length for 1/2” PVC and CPVC solution tubes is 6”. PVC and CPVC solution tubes are not covered by warranty when used in process flows with velocities of 6 fps or greater.
  4. Availability of SAF-T-Seal tip with selection of Titanium solution tube material subject to change.  Consult factory prior to selecting.

HASTELLOY  C-276 is a registered trademark of Haynes International.