FL-300

Flanged Heavy Service Retractable Injection Quill
Min. 3"  Valve x 2-1/2" Solution Tube

DOWNLOADS

SPECIFICATIONS

SAFETY RATING 250 psi
CHECK VALVE Optional
SAF-T-SEAL TIP Not available
QUICK DISCONNECT Not available
MINIMUM VALVE/PROCESS CONNECTION SIZE 3"
INLET CONNECTION SIZE 2-1/2"
SOLUTION TUBE SIZE 2-1/2"
SOLUTION TUBE ID 2.469"
SOLUTION TUBE OD 2.875"
saf

ORDERING OPTIONS

Example:  FL-300-1-300-S-H-18-0-00

SERIES

FL-300

VALVE CLASS

1 = 150 Class
3 = 300 Class

VALVE SIZE

300 = 3"
400 = 4"
600 = 6"

VALVE MATERIAL

S = Stainless Steel
H = Alloy C
A = Alloy 20

TUBE MATERIAL

H = Alloy C276
S = 316SS
A = Alloy 20
T = Titanium Gr.2

INSERTION LENGTH

Specify length in inches.

TIP CONFIGURATION

0 = Standard
B = 45° Bevel
DH = Diffuser Holes

CHECK VALVE

00 = No Check Valve
05 = Alloy, FKM
06 = Alloy, EPDM

DIMENSIONS

(A) OPERATING LENGTH 23.5"
(B) GUIDE PIPE LENGTH 18.25"
(C) VALVE/GLAND LENGTH See Table
EXTRACTION LENGTH (A) + (B) + (C) + INSERTION LENGTH
Line drawing of FL series showing relevant dimensions.

(C) VALVE HEIGHTS

Per ANSI B16.10

Size 150 Class 300 Class
3/4" 4.61" 5.98"
1" 5.00" 6.50"
1-1/2" 6.50" 7.48"
2" 7.01" 8.50"
2-1/2" 7.48" 9.49"
3" 7.99" 11.14"
4" 9.02" 12.00"
6" 15.51" 16.00"

TECHNICAL NOTES

  1. Each size of FL series quill has a minimum required valve size.  Valve sizes larger than this minimum can be accomodated.
  2. Inlet connection is threaded (NPT) by default.  Flanged inlet options may also be available.  Consult factory for details.
  3. SAF-T-FLO does not provide recommendations regarding diffuser hole layouts.
  4. PVC and CPVC check valves are threaded floating ball type.  Alloy check valves are threaded, spring loaded check valves with a cracking pressure of .5 psi.  When selecting alloy material, the body material of the check valve will be the same material type as the solution tube.

HASTELLOY  C-276 is a registered trademark of Haynes International.