FL-100
Flanged Heavy Service Retractable Injection Quill
Min. 1" Valve x 1/2" Solution Tube
DOWNLOADS
SPECIFICATIONS
| SAFETY RATING | 250 psi |
| CHECK VALVE | Optional |
| SAF-T-SEAL TIP | Optional |
| QUICK DISCONNECT | Not available |
| MINIMUM VALVE/PROCESS CONNECTION SIZE | 1" |
| INLET CONNECTION SIZE | 1/2" |
| SOLUTION TUBE SIZE | 3/8" |
| SOLUTION TUBE ID - W/ SAF-T-SEAL | 0.546" |
| SOLUTION TUBE ID - W/O SAF-T-SEAL | 0.622" |
| SOLUTION TUBE OD | 0.840" |
ORDERING OPTIONS
Example: FL-100-1-100-S-S-10-CE-E
SERIES
FL-100
VALVE CLASS
1 = 150 Class
3 = 300 Class
3 = 300 Class
VALVE SIZE
100 = 1"
150 = 1-1/2"
200 = 2"
250 = 2-1/2"
300 = 3"
400 = 4"
600 = 6"
150 = 1-1/2"
200 = 2"
250 = 2-1/2"
300 = 3"
400 = 4"
600 = 6"
VALVE MATERIAL
S = Stainless Steel
H = Alloy C
A = Alloy 20
H = Alloy C
A = Alloy 20
TUBE MATERIAL
H = Alloy C276
S = 316SS
A = Alloy 20
T = Titanium Gr.2
S = 316SS
A = Alloy 20
T = Titanium Gr.2
INSERTION LENGTH
Specify length in inches.
TIP CONFIGURATION
0 = Standard
B = 45° Bevel
CE = SAF-T-Seal Tip, EPDM
CV = SAF-T-Seal Tip, FKM
Note: SAF-T-Seal availability with selection of titanium tube material is subject to change. Inquire prior to selecting.
B = 45° Bevel
CE = SAF-T-Seal Tip, EPDM
CV = SAF-T-Seal Tip, FKM
Note: SAF-T-Seal availability with selection of titanium tube material is subject to change. Inquire prior to selecting.
CHECK VALVE
X = No Check Valve
V = FKM
E = EPDM
K = KALREZ 6375
V = FKM
E = EPDM
K = KALREZ 6375
DIMENSIONS
| (A) OPERATING LENGTH | 16.75" |
| (B) GUIDE PIPE LENGTH | 13.75" |
| (C) VALVE/GLAND LENGTH | See Table |
| EXTRACTION LENGTH | (A) + (B) + (C) + INSERTION LENGTH |
(C) VALVE HEIGHTS
Per ANSI B16.10
| Size | 150 Class | 300 Class |
|---|---|---|
| 3/4" | 4.61" | 5.98" |
| 1" | 5.00" | 6.50" |
| 1-1/2" | 6.50" | 7.48" |
| 2" | 7.01" | 8.50" |
| 2-1/2" | 7.48" | 9.49" |
| 3" | 7.99" | 11.14" |
| 4" | 9.02" | 12.00" |
| 6" | 15.51" | 16.00" |
FLEXIBLE HOSE ASSEMBLIES
Available separately, flexible hose assemblies help take the guess work out of connecting to a chemical feed when installing. Additionally, by avoiding multiple rigid fittings, the assemblies can improve the ease of use when inserting and retracting the solution tube.
TECHNICAL NOTES
- When selecting a check valve, the check valve will be an integrated spring loaded ball check valve. The body material will be the same as that of the solution tube material. The check valve spring cracking pressure is 5 psi.
- Availability of SAF-T-Seal Tip with selection of titanium solution tube material is subject to change. Please inquire prior to selecting.
HASTELLOY C-276 is a registered trademark of Haynes International.