Retractable, Standard Service Injection Quill
2" Valve x 1-1/2" Solution Tube
|SAFETY RATING||150 psi|
|SAF-T-SEAL TIP||Not available|
|QUICK DISCONNECT||Not available|
|VALVE/PROCESS CONNECTION SIZE||2"|
|INLET CONNECTION SIZE||1-1/2"|
|SOLUTION TUBE SIZE||1-1/2"|
|SOLUTION TUBE ID - PVC & CPVC||1.500"|
|SOLUTION TUBE ID - ALLOY||1.610"|
|SOLUTION TUBE OD - ALL MATERIALS||1.900"|
C = CPVC
H = Alloy C276
S = 316SS
A = Alloy20
T = Titanium Gr.2
4 = 4"
6 = 6"
8 = 8"
10 = 10"
12 = 12"
Alloy Models Only
18 = 18"
24 = 24"
B = 45° Bevel
DH = Diffuser Holes
01 = PVC, FKM
02 = PVC, EPDM
03 = CPVC, FKM
04 = CPVC, EPDM
05 = Alloy, FKM
06 = Alloy, EPDM
|(A) OPERATING LENGTH||17.5"|
|(B) VALVE/GLAND LENGTH||11"|
|EXTRACTION LENGTH||(A) + (B) + INSERTION LENGTH|
FLEXIBLE HOSE ASSEMBLIES
Available separately, flexible hose assemblies help take the guess work out of connecting to a chemical feed when installing. Additionally, by avoiding multiple rigid fittings, the assemblies can improve the ease of use when inserting and retracting the solution tube.
- Main connection thread type is NPT by default. CC (AWWA) also available. Consult factory for details.
- Maximum insertion length for 1” PVC and CPVC solution tubes is 12”. PVC and CPVC solution tubes are not covered by warranty when used in process flows with velocities of 6 fps or greater.
- Diffuser hole configurations to be determined by customer. SAF-T-FLO does not provide recommendations regarding diffuser hole layouts.
- PVC and CPVC check valve options are floating ball type. Alloy check valves are spring loaded. Alloy check valves are same material as solution tube.
HASTELLOY C-276 is a registered trademark of Haynes International.